CC4 combination ceramic/ceramic whetstone   We're happy to present something everyone has been waiting for - a combination ceramic/ceramic whetstone that will handle your finest sharpening needs. The newly-developed CC4 whetstone consists of a super fine ceramic stone (white side) (0,1 micron) and a ceramic stone, made of synthetic sapphires (dark gray) (1 micron). You don't need any lubrication for these stones but now and then you should consider cleaning them with water and liquid soap. A leather pouch is included.   Dimensions: 32 x 100 mm Weight: 51 g   How to use your whetstone:If your knife is dull, we advise you to start with a diamond stone. After restoring the edge to original shape, de-burr the edge lightly with the grey side of the ceramic stone in order to get a razor-sharp edge. The white side of the CC4 is a very smooth ceramic stone, it´s mostly used for polishing the edge. Use no oil or water.Start by laying the blade flat on the stone, raise the blade spine approx. the thickness of the blade, and start moving the knife in circular motions.

Diamond steel D12, size 300 mm.Kitchen knives, which need to be quickly sharpened, are preferably honed by our diamond steel D12. This oval steel is covered with fine diamonds and you will find that the result comes fast even if the knife is made of a hard, stainless steel. To insure a long life of the steel, we have covered the surface with titaniumaluminanitrid, an extremely hard and sophisticated material, only is found on exclusive products. The diamond steel is used for establishing the wedge-shape of the edge and in certain cases, the micro-teeth made by the diamond steel might deliver a very good cutting performance, e g for fresh bread.

Bench stone DC 521, diamond stone (coarse), ceramic stone (fine). DC521 is a bench stone of a less common category, since it offers two different kinds of stones. The yellow part is a fast and aggressive diamond stone, while the dark is a slow, very fine ceramic stone. Both surfaces are precision flat, which is a prerequisite for perfect sharpening results. The diamond stone works fast and should be used if the edge is very thick. The sharpness obtained is usually enough for everyday tasks. The ceramic whetstone works much more slowly and gives a smoother, razor-sharp edge when necessary. For tools and chef knives, this bench stone is among the best we can offer. It comes in a nice gift box, and sharpening advises are added.

Fällkniven C10 Ceramic Steel, Blade lenght 270 mm, Total lenght 410 mm.We are introducing a new kind of ceramic steel for sharpening kitchen knives, the C10.We have tested it very carefully and found that it brings a tremendously good edge, especially on high quality chef’s knives. What’s good as well is that it has anti-break and shock-absorbing qualities – should you drop it to the floor from a kitchen table, it will most likely not break! Still the surface hardness is as high as 9 on the Mohs scale, only the diamond reach 10.Together with the D12 diamond sharpening steel, this is by far the best solution to offer to quality-minded users, professionals or amateurs.Blade length 270 mm (10.6”)Total length 410 mm (16.1”)

Fällkniven D12 Pro Diamond SteelDIAMONDS ARE FOREVERNot only does our diamond steel feature a surface fully covered with DeBeer’s diamonds, it’s also made from a solid, well heat treated and tempered premium steel. The benefit you’ll get is a steel which will work extremely well for quite many years.The independent test institute CATRA in Great Britain has compared our steel with diamond steels from other manufacturers and found that our steel provides a ten times longer sharpening life and metal removal – after more than 40.000 strokes it still worked while  the others had given up after 4000 strokes!So, if you’re looking for a professional diamond sharpening steel you know the source

The same diamond whetstone as DC3, but instead of the leather pouch, it is sold with a double coated pressure sensitive adhesive tape which allows you to fasten it on any flat spot, e g our zytel sheaths. The VHB 5925F tape is extremely strong and will harden permanently within 24 hrs. In size the D3t will fit the F1, S1, H1 and the A1 zytel sheath. Dimensions: 75 x 25 x 2 mm

Der kompakte Diamant-Keramik Dualschärfstein DC3 (Kombischärfstein) von Fällkniven im Format 25 mm x 75 mm. Lieferung erfolgt im schwarzen Lederetui.DC-Wetzsteine sind neuentwickelte Kombinationsteine, bei denen eine Seite aus einem Diamantwetzstein (25 Mikron) und die andere Seite aus einem keramischen Wetzstein (5 Mikron) besteht. Aufgrund der sehr harten Materialien können auch pulvermetallurgische Stähle nachgeschärft werden.Es wird empfohlen, den Schleifstein gelegentlich mit Spülmittel und warmem Wasser zu reinigen. Ein Öl ist für die Benutzung nicht notwendig. Tipp: Produktinformation downloaden "Fällkniven Messer schärfen"

Fällkniven Diamondstick DF24 - diamond, 5x20x150 mm, diamond stone length 61 mm, 24 grams. If you haven’t tried this diamond stone, you have a pleasant surprise in front of you. This lightweight, handy sharpener is incredibly good at sharpening all kinds of cutting tools because of the good handle. And diamonds deliver a really good edge on any blade steel you try it on, no problems. In addition, you don’t need to mess with oil or water, and if you think the DF24 feels soft, wash it off with warm water and some detergent. At first, the diamond stone is a little rough but after a short break-in period, it delivers a very smooth and sharp edge, good enough for almost all purposes. The diamonds are held in place in the matrix by a layer of titanium aluminum nitride which greatly extends the life of the sharpening stone. Measurements: 5x20x150 mm, of which diamond stone length 61 mm. Weight 24 gram.

Original Griffschalen für das Fällkniven F1x und F1xb inkl. Schrauben und Distanzhülsen 

Faltbarer doppelseitiger Diamantschärfer FDD von Fällkniven mit zwei unterschiedlichen Oberflächenkörnungen - 44 Micron (grob) und 25 Micron (fein). Ideal für schnelles Nachschärfen unterwegs und zu Hause ohne großen Aufwand, ohne Öl, ohne Wasser oder Schleifpasten. Größe (geschlossen) 125 x 30 mm, geöffnet 226 x 30 mm.   Warum mit Diamant schärfen? Fakt ist, Messerstähle entwickeln sich stetig weiter und werden Zäher und vor allem Härter. Die Lösung um effektiv diese verbesserten, auch von Fällkniven eingesetzten Stähle zu Schärfen, sind diamantbeschichtete Messerschärfer. Vorteil der Diamantschärfer sind nicht nur der bessere Abtrag des Stahls als auch die feinere Körnung und des sich daraus ergebenden feinen Schliffbildes an der Klingenschneide. Hinzu kommt die Tatsache, dass diese Diamantschärfer weder Öl noch Wasser oder andere Schleifpasten als Schleifmittelzusatz benötigen. Somit kann der Diamantschärfer auch unterwegs ohne großen Aufwand genutzt werden. Ideal auf Touren oder beim Camping.  Die Oberfläche besteht aus Titan-Aluminium-Nitrid, was die Lebensdauer der Schärfer erheblich verlängert. Die grobe Seite, mit 44 Mikron Korngröße ist bei Klingenausbrüchen oder Scharten zu empfehlen.Die feinere Seite mit 25 Mikron Korngröße wird zum normalen Abziehen und Schärfen genutzt. Dem doppelseitiger Diamantschärfer FDD von Fällkniven liegt eine Gebrauchsanweisung in englischer Sprache bei. Verwenden Sie zur Reinigung etwas Spülmittel und heißes Wasser. Wie alle Diamantschärfer ist dieser Schleifstein anfangs etwas rau, wird aber nach einiger Zeit glatter. Wenn Sie Ihr Messer viele hundert Male geschärft haben, sollten Sie erwägen, dem Messer wieder einen orginal Werksschliff zu verpassen. Am einfachten Sie schicken Ihr Messer hierzu direkt zu Fällkniven.  

Fällkniven FS3 Flip Stone Sharpener, 2 5/8" tapered double sided Ceramic 1 micron grit and Diamond 25 micron grit stone. Smooth, flat surface allows for easy sharpening. Uses no oil or water. Stone folds into 3 3/8" black Zytel handle for convenient storage when not in use. Depress button lock to flip the stone out of the handle. In the open or closed position the sharpener resembles a pocket knife. Hang packaged.

Fällkniven FS4 Flipstone. Never before has it been such a pleasure to sharpen your knife! Not only are the new Flipstones fun to handle but these diamond and ceramic whetstones will create a sharp edge on any knife. The diamond stone is coated with Titanium Alumina Nitride whilst the ceramic is made of synthetic Sapphires. Both materials are extremely hard and measure 10 and 8 on the Mohs scales of hardness respectively. They will also retain a smooth, flat surface making the sharpening process easier, even with the hardest specialty powder steels. Both stones are sandwiched together using 3M tape and cannot come apart. They are used dry, although a little soap and water can be used to clean the surface. If they feel slightly rough at first they will gradually smooth down and actually improve with age. Instructions: Hold the flipstone in your left hand. Push the catch on the upper section of the handle forward and press the exposed round button. A steel spring will automatically fold out of the whetstone and lock into position. To retract, press the round  button and collapse the stone by hand. Fold back the catch to prevent accidental unfolding. Model                 Length folded FS3                     98,7 mm / 3.88” FS4                   112,8 mm / 4.44” Diamond grit 25 micron Ceramic grit     1 micron Zytel handle and stainless bolts

Tek-Lok Sheath Attachment - Measures 3" x 2 1/8" overall. Black fiber reinforced nylon construction. Innovative belt loop system that is adaptable to many sheath systems. The locking system allows the knife to be carried in the vertical or horizontal position on your belt or web gear. Includes fasteners.

Mini Tek-Lok - Measures 1 5/8" x 2 1/8". Snaps securely around belts up to 1 1/2" wide. Black Kydex construction. Offers a variety of holes and slots for securing knife sheath to belt in several different positions. Bulk packed.