Fallkniven NL4 Frej with Leathersheath

Fällkniven D12 Pro Diamond SteelDIAMONDS ARE FOREVERNot only does our diamond steel feature a surface fully covered with DeBeer’s diamonds, it’s also made from a solid, well heat treated and tempered premium steel. The benefit you’ll get is a steel which will work extremely well for quite many years.The independent test institute CATRA in Great Britain has compared our steel with diamond steels from other manufacturers and found that our steel provides a ten times longer sharpening life and metal removal – after more than 40.000 strokes it still worked while  the others had given up after 4000 strokes!So, if you’re looking for a professional diamond sharpening steel you know the source

Diamond steel D12, size 300 mm.Kitchen knives, which need to be quickly sharpened, are preferably honed by our diamond steel D12. This oval steel is covered with fine diamonds and you will find that the result comes fast even if the knife is made of a hard, stainless steel. To insure a long life of the steel, we have covered the surface with titaniumaluminanitrid, an extremely hard and sophisticated material, only is found on exclusive products. The diamond steel is used for establishing the wedge-shape of the edge and in certain cases, the micro-teeth made by the diamond steel might deliver a very good cutting performance, e g for fresh bread.

Bench stone DC 521, diamond stone (coarse), ceramic stone (fine). DC521 is a bench stone of a less common category, since it offers two different kinds of stones. The yellow part is a fast and aggressive diamond stone, while the dark is a slow, very fine ceramic stone. Both surfaces are precision flat, which is a prerequisite for perfect sharpening results. The diamond stone works fast and should be used if the edge is very thick. The sharpness obtained is usually enough for everyday tasks. The ceramic whetstone works much more slowly and gives a smoother, razor-sharp edge when necessary. For tools and chef knives, this bench stone is among the best we can offer. It comes in a nice gift box, and sharpening advises are added.

CC4 combination ceramic/ceramic whetstone   We're happy to present something everyone has been waiting for - a combination ceramic/ceramic whetstone that will handle your finest sharpening needs. The newly-developed CC4 whetstone consists of a super fine ceramic stone (white side) (0,1 micron) and a ceramic stone, made of synthetic sapphires (dark gray) (1 micron). You don't need any lubrication for these stones but now and then you should consider cleaning them with water and liquid soap. A leather pouch is included.   Dimensions: 32 x 100 mm Weight: 51 g   How to use your whetstone:If your knife is dull, we advise you to start with a diamond stone. After restoring the edge to original shape, de-burr the edge lightly with the grey side of the ceramic stone in order to get a razor-sharp edge. The white side of the CC4 is a very smooth ceramic stone, it´s mostly used for polishing the edge. Use no oil or water.Start by laying the blade flat on the stone, raise the blade spine approx. the thickness of the blade, and start moving the knife in circular motions.

Fallkniven NL1 Thor from the Northern Light Series, blade length 254 mm, length 385 mm, Blade thickness 7 mm, weight 520 g, supplied with a leather sheath.The NL1 Thor by Fallkniven is a cleaver of the best quality - this has been spared to make the knife so sturdy, beautiful and comfortable as possible. The NL1 Thor is a joy to behold and to use it is of particular appeal.The blade is made of laminated steel VG 10 (multi-layer steel) with a cutter from VG 10 steel, and the sides are made of hard, stainless 420J2 steel. This combination is unquestionably the best, since it brings together all conceivable and desirable properties such as resilience, resistance, long lasting sharpness, etc. in a single knife. The 7 mm thick blade is tough enough for most work - by the steel laminate gives a 20% stronger blade compared with a normal blade VG 10 steel.Anyone who has ever used a cleaver for heavy work, knows how big are the demands on the blade and handle. The shaft of the NL1 consists of selected cowhide provides a secure, non-slip grip. The leather is unaffected by oil and solvents, water-tight and gets the time a beautiful patina.A convex cutting edge is the ultimate solution if you want a combination of perfect performance and strong cutting edge - the NL1 has one. Anyone who knows about the knives anything knows that such a cut can be made by hand. Therefore, as 99.9% of all knives have no such blade.It is obvious that the NL1 Thor is only suitable for professional users with extensive experience in dealing with knives. The NL1 Thor is a cleaver for hard work and those who learn to use this knife properly, has a flexible tool to do all the work that you can expect from a knife. Great, incredibly beautiful and a reliable companion!So it seemed natural to give this knife the name of the strongest and bravest of God Aesire: Thor, the god of thunder and Aesire ruler of Asgard, the realm of.Cutter supplied including leather sheath.Overall length: 385 mm Blade length: 254 mmBlade thickness: 7 mm Blade Profile: ConvexAngel: ContinuousWeight: 520 gSteel: Lam. VG 10Hardness: 59 HRCShaft material: aluminum & leatherGuard: Stainless SteelLock: AluminumSheath: Leather

Fallkniven NL3 Njord from the Northern Light Series, blade length 150 mm, length 268 mm, Blade thickness 6 mm, weight 280 g, supplied with a leather sheath.Njord (Swedish: Njord) was a fertility god in the Norse sagas and belonged to the family of the Vanir. He was also the god of sailors and fishermen, the ruler of coasts and shores. NL3 Njord is a powerful knife that is balanced and pleasant to handle. A nicer round knife can probably find. The thickness of the blade sits naturally in the laminate steel VG 10 The NL 3 Njord is a good, stable and reliable all-round knife - and it's beautiful!Cutter supplied including leather sheath.Overall length: 268 mmBlade length: 150 mmBlade thickness: 6.0 mmBlade Profile: ConvexAngel: ContinuousWeight: 280 gSteel: Lam. VG 10Hardness: 59 HRCShaft material: aluminum & leatherGuard: Stainless SteelLock: AluminumSheath: Leather

Fallkniven NL2 Oden from the Northern Light Series, blade length 200 mm, total length 323 mm, Blade thickness 6.5 mm, weight 380 g, supplied with a leather sheath.Together with Thor was the one-eyed Odin (Wotan - in Swedish Oden) is regarded as the supreme god of the Norse sagas. He was both the father of gods and of men. In his eight-legged horse "Sleipnir" horse, accompanied by his two scouts, the ravens Hugin and Muninn, he was the undisputed ruler of Valhalla. NL2 Oden is a powerful, versatile knife with stainless steel blade made of laminated VG 10 The property is excellent and stab the knife is very well balanced. The well-made leather handle darkens with age and given a patina that is with increasing use and more beautiful. Cutter supplied including leather sheath.Overall length: 323 mm Blade length: 200 mmBlade thickness: 6.5 mmBlade Profile: Convex Angel: ContinuousWeight: 380 gSteel: Lam. VG 10Hardness: 59 HRC Shaft material: aluminum & leatherGuard: Stainless SteelLock: AluminumSheath: Leather